; newWindow.focus())
Real-Time 3D Graphics Simulation for Computer Numerical Control
| G98 LINEAR FEEDRATE PER TIME | |
|
|
N_ G98 |
| The G98 command sets the linear feedrate to units (inch or millimeter) per time (minutes). The setting depends on which type of unit is currently active. | |
| Example G98 | |
| % | (PROGRAM START FLAG) |
| :1098 | |
| N5 G20 G40 G99 | |
| N10 T1212 M08 | |
| N15 G98 M03 S2000 | |
| N20 G00 X0 | |
| N25 Z0.1 | |
| N30 G01 Z-0.2 F2 | |
| N35 G00 Z3 | |
| N40 X4 T1200 | |
| N45 T1010 | |
| N50 G00 X0 | |
| N55 Z0.1 | |
| N60 G74 Z-1 F0.5 D0 K0.25 | |
| N65 G99 G00 Z3 | |
| N70 T1000 X4 | |
| N75 M05 | |
| N80 M02 |