CNCezPRO™ Software

Real-Time 3D Graphics Simulation for Computer Numerical Control



G92 REPOSITION ORIGIN POINT
N_ G92 X_ Y_ Z_
The G92 is used to reposition the origin point. The origin point is not a physical spot on the machine tool, but rather a reference point to which the coordinates relate.
Example G92
% (PROGRAM START FLAG)
:1023
N05 G90 G20
N10 M06 T2
N15 M03 S1200
N20 G00 X0.5 Y0.5
N25 Z0.1
N30 G01 Z-0.25 F5
N35 G02 X0.5 Y0.5 I0.25 J0.25
N40 G00 Z0.125
N45 X1.5 Y1.5
N50 G92 X0.5 Y0.5
N55 G01 Z-0.25 F5
N60 G02 X0.5 Y0.5 I0.25 J0.25
N65 G00 Z0.1
N70 X1.5 Y-0.5
N75 G92 X0.5 Y0.5
N80 G01 Z-0.25 F5
N85 G02 X0.5 Y0.5 I0.25 J0.25
N90 G00 Z1
N95 X-2 Y0
N100 G92 X0 Y0
N105 M05
N110 M30