; newWindow.focus())
Real-Time 3D Graphics Simulation for Computer Numerical Control
| G54 – G59 WORKING COORDINATE SYSTEM | |
|
|
N_ G54 through G59 |
| The G54 – G59 commands are used to reposition the origin as per a user- defined working coordinate system. Six register sets in the controller which hold the values for the working coordinate systems. The G54 – G59 commands are very useful when multiple workpiece fixtures are used. | |
| Example g54 | |
| % | (PROGRAM START FLAG) |
| :1054 | |
| N5 G90 G20 G54 | |
| N10 T0505 | |
| N15 M03 S1300 | |
| N25 G00 Z-0.5 | |
| N30 G75 X0.5 Z-0.75 F0.125 D0 I0.125 K0.125 | |
| N35 G00 X2.0 | |
| N40 Z2.0 | |
| N45 G55 G00 X1.0 Z0.0 | |
| N50 G00 Z-0.5 | |
| N55 G75 X0.5 Z-0.75 F0.125 D0 I0.125 K0.125 | |
| N60 G00 X2.0 | |
| N65 Z2.0 | |
| N70 G56 G00 X1.0 Z0.0 | |
| N75 Z-0.5 | |
| N80 G75 X0.5 Z-0.95 F0.125 D0 I0.125 K0.125 | |
| N85 G00 X2.0 | |
| N90 Z2.0 | |
| N95 G54 | |
| N100 T0500 M09 | |
| N105 M05 | |
| N110 M30 |