; newWindow.focus())
Real-Time 3D Graphics Simulation for Computer Numerical Control
| G43 TOOL LENGTH COMPENSATION (PLUS) | |
|
|
N_ G43 H_ |
| The G43 command compensates for tool length in a positive direction. | |
| Example G43 | |
| % | (PROGRAM START FLAG) |
| :1014 | |
| N5 G90 G20 G40 G49 | |
| N10 M06 T12 | |
| N15 M03 S2000 | |
| N20 G00 X1 Y1.5 | |
| N25 Z0.1 | |
| N30 G01 Z-0.5 F5 | |
| N35 G00 Z0.1 | |
| N40 X2 | |
| N45 G01 Z-0.5 | |
| N50 G00 Z0.1 | |
| N55 X3 | |
| N60 G01 Z-0.5 | |
| N65 G00 Z1 | |
| N70 X0 Y0 | |
| N75 M06 T10 | |
| N80 M03 S1000 | |
| N85 G43 H13 | (CUTTER COMPENSATION BY 0.25 INCHES) |
| N90 G00 X-1.125 | |
| N95 Z-0.25 | |
| N100 G01 X5.125 F15 | |
| N105 G00 Y3 | |
| N110 G01 X-1.125 | |
| N115 G00 Z1 | |
| N120 X0 Y0 | |
| N125 G49 M05 | |
| N130 M30 |