; newWindow.focus())
Real-Time 3D Graphics Simulation for Computer Numerical Control
| G02 CIRCULAR INTERPOLATION (CLOCKWISE) | |
|
|
N_ G02 X_ Z_ I_ K_ F_ (I and K specify the radius) or N_ G02 X_ Z_ R_ F_ (R specifies the radius) |
| Circular Interpolation is defined by the G02 command. It executes all circular or radial cuts in a clockwise motion. The G02 command requires an endpoint for the move, the radius, and a feedrate. | |
| Example G02 | |
| % | (PROGRAM START FLAG) |
| :1002 | |
| N05 G20 G40 | |
| N10 T0202 | |
| N15 M03 | |
| N20 G00 X1.75 | |
| N22 Z0.1 M08 | |
| N25 G01 Z-0.5 F0.012 | |
| N30 G00 X2 | |
| N35 Z0.1 | |
| N40 X1.4 | |
| N45 G01 Z-0.25 | |
| N50 G00 X2.1 | |
| N55 Z-1 | |
| N60 G01 X2 | |
| N65 G02 X0 Z0 I-1 K0 | |
| N70 G00 X2.1 | |
| N75 Z-1 | |
| N80 G01 X2 | |
| N85 G02 X2 Z-2 I0.5 K-0.5 | |
| N90 G00 X4 Z3 M09 | |
| N95 T0200 M05 | |
| N100 M30 |