; newWindow.focus())
Real-Time 3D Graphics Simulation for Computer Numerical Control
| G01 LINEAR INTERPOLATION | |
|
|
N_ G01 X_ Y_ Z_ F_ |
| The G01 is a straight-line feed move in a combination of X, Y or Z axis. It's used specifically for the linear removal of material from a workpiece | |
| Example G01 | |
| % | (PROGRAM START FLAG) |
| :1002 | (PROGRAM #1002) |
| N5 G90 G20 | (BLOCK #5, ABSOLUTE IN INCHES) |
| N10 M06 T3 | (TOOL CHANGE TO TOOL #3) |
| N15 M03 S1250 | (SPINDLE ON CW AT 1250RPM) |
| N20 G00 X1 Y1 | (RAPID OVER TO X1,Y1) |
| N25 Z0.1 | (RAPID DOWN TO Z0.1) |
| N30 G01 Z-0.125 F5 | (FEED DOWN TO Z-0.125 AT 5IPM) |
| N35 X3 Y2 F10 | (FEED DIAGONALLY TO X3,Y2 AT 10IPM) |
| N40 G00 Z1 | (RAPID UP TO Z1) |
| N45 X0 Y0 | (RAPID OVER TO X0,Y0) |
| N50 M05 | (SPINDLE OFF) |
| N55 M30 | (PROGRAM END) |