; newWindow.focus())
Real-Time 3D Graphics Simulation for Computer Numerical Control
| G00 POSITIONING IN RAPID | |
|
|
N_ G00 X_ Y_ Z_ |
| The G00 is a rapid tool move that is used when moving the tool in a linear motion from position to position without cutting any material | |
| Example G00 | |
| % | (PROGRAM START FLAG) |
| :1001 | (PROGRAM NUMBER 1001) |
| N5 G90 G20 | (ABSOLUTE, AND INCH PROGRAMMING) |
| N10 M06 T2 | (TOOL CHANGE, TOOL #2) |
| N15 M03 S1200 | (SPINDLE ON CW, AT 1200 RPM) |
| N20 G00 X1.0 Y1.1 | (RAPID OVER TO X1,Y1) |
| N25 Z0.1 | (RAPID DOWN TO Z0.1) |
| N30 G01 Z-0.25 F5 | (FEED MOVE DOWN TO 0.25") |
| N35 Y3 | (FEED MOVE TO Y3) |
| N40 X5 | (FEED TO X5) |
| N45 X1.0 Y1.0 Z-0.125 | (FEED TO X1,Y1,Z-0.125) |
| N50 G00 Z1.0 | (RAPID UP TO Z1) |
| N55 X0 Y0 | (RAPID OVER TO X0,Y0) |
| N60 M05 | (SPINDLE OFF) |
| N65 M30 | (END OF PROGRAM) |